Safety Technics

Locking Device

In the combined state, the locking device can withstand up to 1000kgs. So that tension is not caused on the wire and the lighting is not falled.

Electric Contacts

The circular contact has a large surface area and an individual elasticity so that electric current flow is excellent.

Detect No Load

If lifter detects no load by light reaches on the ground or hanged to obstacle, lifter stops operation automatically.

Detect Over Load

If lifter detects over load by lighting fixture hanged to obstacle, lifter stops operation automatically.

Auto Stop Function

Lifter can adjust the lowering height. If the lowering height was set by RCU, lifter always stops at set height automatically.

No Spark

Even if the lighting is lowered down when the lighting is turned on, there is no spark generated on the contacts of the lifter.

Detect Overheat

If lifter is overheated by repeat operation, lifter checks temperature of motor and stops operate automatically.

Detect of Ascend Stop

If the lower part reaches at the upper part and is combined, lifter stops operation automatically.

Multi Contacts Type Lifters

Most of our lifters have multi contacts option, which allows the lighting to be controlled by 0-10V, DALI, DMX, emergency, CCTV, etc.

Apart from 2 contacts for the main circuit, there are 4 or 6 additional auxiliary contacts available.

Most of our lifters can be ordered as Batten type, which allows two or more lifters to synchronize and operate at the same time.

Batten type can be used with lighting rigs, lighting tracks, hanging screens, stage lighting, banners, etc.